Operation Of The Appliance - Eldom slab HC500C Instrucciones De Uso

APPLIANCE OPERATION
Control panel (1) /
Remote controller (7)
I.
Display
II.
Mains switch
III. Changing the
operating mode
IV. "+"
V.
"-"
VI. Timer
VII. Programming
VIII. The "window" function
Display (I)
a)
Wi-Fi indicator light
b) Key lock indicator light
c)
Temperature indicator
d)
Timer indicator light
e)
Operating mode indicator light
f) Day mode indicator light
g)
Night mode indicator light
h)
Anti-frost mode indicator light
i) "Window" function indicator light
j) "Operation end" indicator light
k)
Time
l) Heating indicator light
m) "Operation start" indicator light
n)
Day of the week indicator lights
The heater can also be controlled by a smartphone with an installed app.
Detailed instructions can be downloaded from www.eldom.eu

OPERATION OF THE APPLIANCE

All setting changes are signalled with a sound.
Before the first use, install the feet or hang the heater on the wall (see INSTALLATION).
Start-up
When used for the first time, the heating elements and insulation can emit characteristic
smell. It is a normal phenomenon.
• Before connecting the appliance to the mains, check that the mains current parameters
(voltage) correspond to the parameters indicated on the device and the switch (5) is set at "0".
Connect the heater to the mains and then move the switch (5) to the "I" position - the
•
display will flash and turn off.
• Press button (II) on the control panel (1) or on the remote control (7) to turn on the
16
Fig. 4
I
II VII
III VI
IV V
Fig. 5
b
a
n
m
VII
IV
V
c d
l
II
III
VI
e
f
g
h
i
j
k