}
6. DISMANTLING
Dismantling is in the reverse order to assembly (see page 11 –15).
When dismantling, do not remove the bracing elements such as
diagonal braces, rear guardrails or access decks until the ladder
frames above them have been dismantled.
To lift out the individual parts, open the snap-on claws by pressing
their locking clips.
16
During dismantling of an intermediate or working platform, first remove
the topmost rear guardrails from the level underneath them. This is
done with the aid of a rear guardrail installed at knee level.
It is placed from above onto the 2nd rung and acts as a lever for opening
the snap-on claw (see detail).
The red locking clips of the decks permit effortless installation and
removal by a single person; first open them and place the deck with
the opened clips on the rung, then open the opposite clips and lift out
the deck.