Tabla de contenido
Bobbin Winding
o Removing bobbin case
Remove the extension table from the machine by pulling
it to the lefto Open the shuttle cover(_) by pulling down
the embossed part on the left of the cover
Raise the needle to its highest position by rotating the
handwheel toward you,
(_
Shuttle cover
(_) Bobbin case
To remove the bobbin case(_)from the shuttle, pull open
the latch of the bobbin case_ Put! the bobbin case straight
out of the shuttte_
o Bobbin winding
[] Release the clutch by pulling out the handwheeL
This
will stop the needle from moving while you wind the
bobbin,
[] Draw thread from the spool,,
[] Guide the thread around the thread guider
[_]Thread
through the hole in the bobbin from the inside to
the outside.,
[]
Put the bobbin on the bobbin winder spindle.
f
[]
i ¸
J
J
h
[]
[]
[]
.J
h
[]
18
Tabla de contenido
