Chrono With Lap And Split Function - Junghaus J615.96 Manual Del Usuario

4.5 Chrono with LAP and SPLIT function

T1
58
All manuals and user guides at all-guides.com
Press the T1 "MODE" button repeatedly
until you reach mode "C". The display
will give the hour, minute, second, 1/10
of a second and 1/100 of a second. The
maximum stop time is 10 hours. After
that the chronoscope stops and the LC
display reverts to "0 00 00 00".
The chronoscope is started and
stopped with the T3 "start/stop"
button. While the chronoscope is
running, the display "C" is replaced by
T3
the number "1".
By pressing the T5 "SPLIT/RESET" but-
ton the counter is reset to "0 00 00 00".
The reset function can only achieved, if
the chronoscope has been stopped
T5
beforehand (display "C").
T2
SPLIT function
While the chronoscope is running, the
current intermediate time can be
displayed by pressing the T5 "SPLIT"
button. The chronoscope continues to
run in the background. Press the T5
"SPLIT" button again to display the
running chronoscope.
T5
LAP function
While the chronoscope is running, the
lap time can be displayed by pressing
the T2 "SET-LAP" button.
T3
The lap time is displayed for approx.
4 seconds and then reverts back to the
running chronoscope. The 2nd lap is
displayed in the top left part of the LC
display by the number "2". The last ten
values can be stored.
By pressing the T3 "START/STOP" but-
ton the chronoscope is arrested.
59