Troubleshooting Guide - Haier HTR13-A Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
To assist in location possible faults use help guide below
BREAKDOWN PHENOMENON
PICTURE
SOUND
Picture with snow
Double or Triple Image
Disturb
Normal
No Picture
No sound
No color
Normal volume
Scramble
Normal or Weak Volume
Color Spot
Normal volume
Note:
1.If the fault can not be corrected using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.

Troubleshooting guide

CHECKING
The aerial direction and connection
Noise
This is called "ghosting" and can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Normal
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Volume Sound mute
No sound
Ensure that the power supply is connected to
the TV set and turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
Adjust color control
Adjust channel again
Color Purity is a fault that can be caused by moving the
TV set, placing magnets near the TV screen or turning
on/off house hold appliances such as vacuum cleaners
near the TV set. Turn the TV off with the main power
switch for 15 minutes. When the power is turned on
again the TV set will automatically degauss the picture.
In severe cases leave the TV set turned off over night.
35
.

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Htr20-aHtf20-aHtf201-a

Tabla de contenido