Ac Voltage Measurement - Greenlee 93-804 Instructivo De Operacion, Servicio Y Piezas

AC Voltage Measurement

1. Connect the red test lead to the + input terminal and the black test lead to the
- input terminal.
2. Set the Range Selector Switch to the proper range (250V or 750V).
Note: If measuring an unknown voltage, start at the highest range, then adjust to
the lower range for best resolution.
3. Connect the test leads across the source or load being measured and read the
display. Press DATA HOLD to hold displayed value. Press again to release.
Note: Voltage reading should always be taken in parallel with the circuit.
All manuals and user guides at all-guides.com
Electrical Shock Hazard.
Contact with live circuits will result in severe injury
or death.
AC Clamp-On Meter
7