Initial Operation - Hunter HEPAtech 30721 Manual De Instrucciones

operation

Initial operation

This section provides basic instructions on the use of your air purifier. After following these
initial directions, please continue reading this booklet to learn how to operate the more
advanced features of your air purifier.
Basic operation of the Air Purifier:
1. Take the air purifier out of the box and remove the clear plastic protective bag.
Place the unit on a firm level floor.
2. Before turning on the air purifier, you need to confirm that the filters are firmly
in place and have not become loose during shipping. To check the filters, first
open the front grill. Release the front grill by placing your fingers under the
handle on the grill and pull forward, then up. Refer to Figs. 4 and 5.
HANDLE
3. Next, check the HEPAtech® filter by pressing firmly on all four corners of the filter
to ensure that it is fully inserted into the filter opening.
4. The carbon pre-filter is mounted inside the front grill with hook tape. Confirm
that it properly covers the grill vents. You may notice a few black particles coming
off the pre-filter. Those particles are part of the odor-removing activated carbon
and will be collected on the filter during use.
43007-01
All manuals and user guides at all-guides.com
Fig. 4
6
PULL
FoRWARD,
THEN UP
Fig. 5