Oven Light Replacement - amzchef BD7009S09 Manual De Instrucciones

Remove the hanger to facilitate cleaning the side wall of the oven. Note: Operate this process must by hand
slightly, or it will damage the enamel.
• Remove all accessories such as grate and baking tray.
• Slightly push down the hook in racks at the clamping point as shown (A).
• Swivel the rack inwards to an angle of approx. 45 degrees(B-C).
• Unhook it at the top and carefully pull it out (C).
• To reinstall after cleaning, follow the steps above in reverse order.
The light used in oven is a special high temperature resistant
light
(AC220V/25W).
Therefore, it is necessary to purchase genuine light from
authorized distributors.
The replacement steps are as follows:
1.Disconnect the power supply of the power socket.
2.Turn the glass cover counterclockwise.(Figure 5)
3.Remove the light and replace it with the same type.(Figure 6)
4.After replacing the light, screw the glass cover clockwise.
The probe used in the oven is a mechanical physical probe. Do not replace it without authorization. In case of
abnormal temperature sensing of the sensor probe, please contact the designated repair shop immediately for
replacement.
Model
Voltage
Rated power
Hob max rated
Oven max rated
Rated frequency
Product size(width * depth * height)
Rated volume
Remove the Slide-in racks

Oven Light Replacement

Sensor Probe Replacement
Specification
BD7009S09+COF6601
380-415V 3N~ 50/60Hz
8600-10200W
6039-7186W
2800W
50/60Hz
595(width）X565(depth）X650(height)
70L
20