amzchef BD7009S09 Manual De Instrucciones página 19

•Do not use a steam cleaner to clean the oven.
•Do not use detergents or corrosive detergents to clean glass door.
•Do not use rough or friction materials or sharp metal scrapers to clean the oven glass door, as they may
scratch the surface.
■ Oven Interior
In order to maintain the oven better, after cooking, the oven should be fully cooled before cleaning.
•Take out all removable parts.
•In order to facilitate cleaning, the oven door can be removed.( Removal method refers to "Remove the
oven door" below.)
•Steam cleaners should not be used when cleaning.
Removable oven door allows users to fully touch the oven interior, making maintenance more convenient and fast.
①Open the door to the maximum angle and pull the lock
back at the hinge of the door(Figure 1). There are two
locks on both sides of the oven door.
②Close the oven door, at about 15 degree, then lift the
door, and slowly pull out from the oven.(Figure 2)
③After cleaning, perform the above-mentioned operations
in the opposite steps to restore the door to its original condition.
■Note: After using a specific detergent, run the oven for 15-20
minutes with maximum heating settings to remove residues in the oven.
In this process, touchable parts may be hotter than usual. Keep
children away from the oven.
Removable oven door allows users to fully touch the oven interior, making maintenance more convenient and fast.
Removing the telescopic runners
For disassembly on the left side (right side mirror-inverted):
①Press on the hooks of the telescopic slide at the points marked A
until they are released from the slide-in grid and then turn the
telescopic slide slightly counterclockwise. (2.1)
②Lift the telescopic slide slightly so that you can remove it from the
grid without the hooks getting caught.
③Now you can remove the telescopic slide from the oven. (2.2)
For mounting on the left side (right side mirror-inverted):
①Place the rail hooks at the points marked B on the upper guide
rail of the desired insertion level in the insertion grid and then
turn the telescopic rail clockwise. (2.3)
②Press the rail hooks at the points marked C on the lower guide
rail until they „snap in". (2.4)
③Before closing the appliance door, make sure that all tele-scopic
runners are fully inserted.
Remove the Oven Door
Removing the telescopic runners
19