Turning the machine on and o
6.3
After the electric and water connections have been
made by a Quali ed Technician, make certain that the
drain pan located under the cup support grille (11) is
correctly connected to the drain.
5
11
Check that all the steam valves are closed. Turn the
machine on using the main switch (5) and follow the
instructions provided on the display, as described below.
• wait for the machine to start up;
Components warm-
ing up
• during start-up, the machine will release water from
the assemblies;
USER Manual
Estimated wait time for
start up
• after start-up, the machine is ready to dispense co ee,
and the display will show the screen below; An orange
steam icon indicates that it is necessary to wait a few
minutes for the steam to be dispensed. A green steam
icon indicates that the machine has reached the pro-
grammed pressure.
Before using the machine, run a few cycles on empty with the lter
holder attached for a few seconds to release any air which may be
in the circuit, so that the delivery groups are completely heated.
In some cases, such as, for example, after washing
the assemblies, all selections will be inactive for a short
time, the display will have reduced brightness and some
messages will appear on the right bar.
After setting the temperature, the display will return
to its normal brightness and the machine will be on
active status again.
6.3.1 Turning the machine o
Turn o the machine using the main switch.
Steam not
available
55
272
of