Adjusting The Filter Holder Clip; Cleaning And Maintenance; Cleaning; Cleaning The Hopper - La Pavoni LPGGRI01 Manual De Uso

4–5. ADJUSTING THE FILTER HOLDER
CLIP
• The height of the filter holder clip can
be adjusted.
• Insert the filter holder clip (7) (Fig. E)
into the appropriate hole.
• Using a screwdriver, loosen the fixing
screw of the filter holder clip (7). Do
not loosen the screw completely.
• Raise or lower the clip to adjust it
according to the size of the filter
holder.
• Once you have found the correct
position, tighten the filter holder clip
fixing screw (7).
The clip is suitable for any type
of filter holder available in the
market.

5. CLEANING AND MAINTENANCE

Unplug the appliance from the
power supply before carrying
out cleaning or maintenance. Do
not pull the power cable or the
appliance itself to remove the
plug from the power outlet.
Maintenance and cleaning
must be carried out by trained
personnel that are authorized by
the manufacturer.
Do not carry out unprofessional
of dangerous repairs and do not
use non-original spare parts.
5–1. CLEANING
• Make sure that the hopper is empty
and then start the grinding to remove
any coffee residues from the burrs.
• Make sure that you have unplugged
the appliance from the power supply
before carrying out cleaning or

maintenance.

5–2. CLEANING THE HOPPER
• After having emptied the hopper,
remove it from the machine and wash
it with water and neutral soap to
remove the oily film left by the coffee
beans.
• Rinse and dry it thoroughly.
• Do the same for the plastic lid.
It is recommended that you clean
the appliance at least once a
week.
5–3. CLEANING THE GRINDING SYSTEM
• After removing the lid, open the upper
burr holder.
• Clean the burrs and the other internal
parts with a brush or a dry cloth. Use a
vacuum cleaner or a jet of compressed
air if necessary. Reinstall the hopper
after replacing the upper burr holder
and the lid.
• For thorough cleaning, use
commercially available detergent
tablets for coffee grinders.
All cleaning and sanitizing must
be carried out using products
approved for use with foodstuffs.
5–4. CLEANING THE OUTSIDE OF THE
MACHINE
•To remove residues of coffee and
dirt from the outside of the machine,
use a damp cloth. Avoid using
detergents
or abrasive materials.
5–5. MAINTENANCE
To ensure that the appliance works
correctly, check the burrs every 250 kg
of coffee and replace if necessary. To
carry out maintenance on the burrs,
disconnect the appliance from power
supply and remove the coffee bean
container. Then loosen the screw on
the cover and the screws below, which
19