Assembling The Exersaucer® - Stage 1 - Evenflo exersaucer BABY ACTIVE Manual Del Usuario

Warnings - continued
WARNING
READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS!
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH! • DO NOT dispose of batteries in fire, as batteries may explode or leak.
• The supply terminals are not to be short-circuited.
• DO NOT use rechargeable batteries.
• DO NOT recharge non-rechargeable batteries.
• Promptly remove exhausted batteries from the toy.
• Remove batteries before storing unit for a prolonged period of time.
• DO NOT allow unit to get wet.
• Dispose of used batteries properly.
Assembling the ExerSaucer
STAGE 1
Stage 1 is for use by children who are at least 4 months old
AND can hold up their head and neck unassisted.
A
B
1. Press Lock Guide
B into Leg A
sure Lock Guide is facing in the correct direction (see illustration). Repeat for the
other three Leg Assemblies.
All manuals and user guides at all-guides.com
WARNING
Make sure Lock Guide is
facing in the correct direction.
A B
, as shown, to create the Leg Assembly. Make
2
STAGE 1
2. Place end of Leg Assembly
Lock Guide B
3. Lift Tray until opening in Tray lines up with hole in Lock Guide
D
Lock into hole in Lock Guide. Tighten Hand Lock until it no longer turns.
C
DO NOT OVERTIGHTEN. Repeat steps 2 and 3 for the other three Leg
Assemblies.
IMPORTANT: When inserting Hand Locks, use the same opening in each Leg
Assembly, or the ExerSaucer will not be level.
A
B
into opening on bottom of Tray
A
lines up with slot in bottom of Tray, as shown.
B
D
3
Assembling the ExerSaucer
. Make sure
D
C
. Screw Hand
B