DeWalt DWX726 Manual De Instrucciones página 5

All manuals and user guides at all-guides.com
ATTACHING THE LEG EXTENSION (FIG. 2, 3)
IMPORTANT: Place stand upside down on the floor or on a level,
stable table as shown in Figure 2.
FIG. 2
W
1. With stand upside down, insert the leg extension (E) in the
stand (K).
2. Align the holes and install two M8 x 15 mm button head screws
(L) with curved washers (M).
3. Tighten securely with the supplied hex wrench (J).
FIG. 3
E
L, M
J
ATTACHING THE WHEEL AND STORAGE FOOT CONNECTOR
(FIG. 4)
1. With stand still upside down, insert the wheel/storage-foot
2. Align the hole and install one M8 x 15 mm button head screw (L)
W
3. Attach the other wheel/storage-foot connector in the same
J
K
ATTACHING THE WHEELS (FIG. 5)
1. Continuing with stand upside down. Slide axle (P) through washer
2. Secure the axle with nut (R). Tighten the nut.
3
connector (N) to the stand (K) with wheel extension (O) facing
outward.
with curved washer (M). DO NOT tighten. NOTE: The screw will
be tightened completely later in the assembly.
manner.
FIG 4
L, M
K
(Q), wheel bushing (U), wheel (D), other washer (Q) and wheel
extension (O) as shown. Ensure the longer side of wheel hub (MM)
is facing inward as shown.
N
O