Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-1258, H-1259
SEALER SERVICE KIT
1. Remove the upper Teflon cloth by unscrewing and
removing Fixed Plate #1. Loosen screws on fixed
plate #2. Slide teflon strip out from under Plate #2.
The Heating Element is now exposed.
2. Remove the Heating Element wire by unscrewing
each end.
3. Once wire is removed, peel off the old Lower Teflon
Strip and attach the new strip after removing its
adhesive backing.
Heating Element
BLADE REPLACEMENT
1. To replace the cutter blade, loosen the screws on
Cutter Bracket.
2. Pull the Cutter Bracket back, and remove the Blade
Handle.
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTALLATION
REMOVE PLUG FROM OUTLET BEFORE INSTALLATION
Fixed Plate #1
Fixed Plate #2
Blade
Handle
Blade
4. Connect the new Heating Element to posts and
tighten screws. Do not bend or twist the Heating
Element wire.
5. Insert new Upper Teflon Strip under Plate #2 and
tighten screws.
6. Reinstall Fixed Plate #1 and tighten screws.
3. Unscrew the Blade from the Blade Handle and insert
new Blade. Tighten the Blade screw.
4. Insert the Blade Handle back into its orginal position
and tighten all screws on the Cutter Bracket.
Cutter Bracket
Para Español, vea página 2.
Pour le français, consulter la page 3.
Lower Teflon Strip
Upper Teflon Strip
0721 IH-1258
Manuales relacionados para Uline H-1258
Resumen de contenidos para Uline H-1258
- Página 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-1258, H-1259 1-800-295-5510 uline.com SEALER SERVICE KIT INSTALLATION REMOVE PLUG FROM OUTLET BEFORE INSTALLATION 1. Remove the upper Teflon cloth by unscrewing and 4. Connect the new Heating Element to posts and removing Fixed Plate #1.
- Página 2 H-1258, H-1259 800-295-5510 uline.mx KIT DE SERVICIO PARA SELLADORA INSTALACIÓN DESENCHUFE DEL TOMACORRIENTE ANTES DE LA INSTALACIÓN 1. Quite la tela de Teflon superior desatornillando y 4. Conecte la nueva resistencia a los postes y apriete quitando la placa fija #1. Afloje los tornillos de la los tornillos.
- Página 3 H-1258, H-1259 1-800-295-5510 uline.ca ENSEMBLE DE SERVICE POUR SCELLEUSE INSTALLATION DÉBRANCHEZ LA FICHE DE LA PRISE DE COURANT AVANT L'INSTALLATION ARRÊT ARRÊT 1. Retirez le tissu supérieur en Teflon en dévissant et en 4. Raccordez le nouvel élément chauffant aux tiges et retirant la plaque fixe nº 1.