Uline H-1246 Manual De Instrucciones

H-1246, H-1247
EXTRA LONG
TABLETOP POLY BAG
SEALER
OPERATING ISSUE
Bag is melting.
Sealer is not producing a good seal all the way
across.
Sealer is not sealing.
Heating element is burning out too quickly.
PAGE 1 OF 3
1-800-295-5510
uline.com
TROUBLESHOOTING
RECOMMENDATIONS
Start with timer on the lowest setting possible. This will
also preserve the heating element.
1. Place additional pressure on the sealing arm.
2. Hold the sealing arm down for 2-4 seconds after
the sealing light goes out.
3. Heating element may need to be replaced.
Heating element may need to be replaced.
Set timer knob to lowest setting that produces a good
seal for the bag thickness. Thicker bags need a higher
setting. (Always start with a low setting and increase
gradually.)
Para Español, vea página 2.
Pour le français, consulter la page 3.
0221 TH-1246