Bulb Replacement - Viesta VDI90230EG Manual Del Usuario

NOTE:
• Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
• When activated carbon filter attached, the suction power will be lowered.

BULB REPLACEMENT

IMPORTANT
● The bulb must be replaced by the manufacturer, its service agent or similarly qualified persons.
● Always switch off the electricity supply before carrying out any operations on the appliance. When
handling bulb, make sure it is completely cool down before any direct contact to hands.
● When handling globes hold with a cloth or gloves to ensure perspiration does not come in contact
with the globe as this can reduce the life of the globe.
NOTE:
• Before changing the lights, make sure that the appliance is plugged off.
• Protect against danger when changing lights, such as wearing gloves.
CHANGING THE LIGHTS
● Remove the grease filter.
● Way 1. Use a tool or the hand to press the spring splinterof both sides of LED light to the inside, until
the light is pressed out, see pic 1.Then slightly pull the light connecting wire out, and dismantle the
terminal of the light connecting wire. See pic 2.
● Way 2.Use straight screwdriver to prize up the LED light bottom edge, see pic 3, then slightly pull out
the LED light and light connecting wire. See pic 2.
● Apply the reverse procedure to install the light back.
Note: It must be sure that the power supply is completely cut off before the above operation.
● ILCOS D code for this lamp is: DBS-1.5/65-S-120/33
» LED modules –rectangle lamp
» Max wattage: 4 x 1.5 W
» Voltage range: DC 12V
» Dimensions:
[ EN ● 13 ]
Version: 2:0
KEN002DH 22.08.2019