Carbon Filter - Viesta VDI90230EG Manual Del Usuario

DISMANTLING
To dismantle the filter 1 proceed as follows:
• Release the lock catch 2.
• Remove the metal grease filter.
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps
- Angle the filter into slots at the back of the hood.
- Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.

CARBON FILTER

Activated carbon filter can be used to trap odors. Normally the activated carbon filter should be changed
at three or six months according to your cooking habit. The installation procedure of activated carbon
filter is as below.
● Remove the al filter.
● Insert the carbon filter in the rectangular hole,fitting it over the motor.
● After inserting the front edge of the carbon filter into the slot on the cooker hood. Lower the back edge
of the carbon filter, until it clicks into place at the rear of the rectangular hole. Raise the two fixing
bars, until they are horizontal over the carbon filter.
● Place the Al. filter back to position.
● Apply reverse procedure to uninstall the carbon filter.
[ EN ● 12 ]
Version: 2:0
KEN002DH 22.08.2019