Instructions Of Use - TESY HL-275W PTC Instalación Y Manual De Manejo

Drill 2 holes of ø6 mm in the wall, at a height of 1.8
2.
EN
m and at a distance of 46 cm from each other. Make
sure the diameter of the holes is identical to the one
of the plastic wall plug.
Place and screw the two screws into the wall plugs
3.
but leave the screw heads projecting out at 15 mm.
Make sure the screws are steadily attached to the
wall and mount the appliance.
Do not cover the appliance when it is working!

INSTRUCTIONS OF USE

•
Turn off all control buttons on the appliance. Then
put the plug into a standard earthed socket with AC
supply. Make sure the plug is steadily inserted into
the socket.
•
The heater is fitted with an overheating protection
system that turns off the appliance when its parts
become too hot.
•
Insert the plug in the wall socket and the power
indicator light
•
The appliance can be controlled manually or
through a remote control. For the remote control
use two ААА batteries(not included in the appliance
set),place them under the rear lid as you watch
out for the poles position, then press and direct
the transmitter of the remote control towards
the appliance. If the appliance does not respond,
probably the batteries need to be changed.
4
Usage and Storage Instructions
All manuals and user guides at all-guides.com
will turn on.
MANUAL CONTROL:
•
Press the „ON/OFF" button on the control panel
once and the heater will function as a fan, blowing
cool air only and the COOLAIR indicator light will
be on
•
Press the „ON/OFF" button twice and the appliance
will start heating at a 1000W power level, the
respective indicator light will turn on.
•
Press the „ON/OFF" button third time and the
appliance will start heating at a 2000W power
level,the respective indicator light will turn on .
•
By pressing the ''ОN/OFF" button for the 4th time
you will turn the appliance off but it will cool itself
for another minute. The light indicator will turn off
afterwards.
SETTING AND REGULATION WITH THE REMOTE
CONTROL:
•
Press the „ON/OFF" button on the control panel and
the heater will function as a fan, blowing cool air
only. The COOLAIR indicator light will be on .
•
Press the 1000W/2000W button once to set to
half power - 1000W. Press the button twice for full
power.
•
By pressing the „TIMER" button you can set the
appliance to turn itself off in half an hour or up to
7 and a half hours later, with a half-hour span for
each step.
•
Press the „ON/OFF" button to turn off the appliance.
The light indicators will go down
Safety system: in order to avoid risk for people or
damage to inner components, the ceramic heater
has been fitted with a safety system that turns the
appliance off automatically when temperature becomes
excessively high.