Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
If the appliance is damaged or not functioning
properly you must stop it and not try to repair it
yourself. For any type of repairs you must consult
the Service Center for post-sale help. There you
will have your damaged part replaced with an
original spare one. Not obeying this instruction will
compromise the appliance safety.
•
If you decide to stop using an appliance of that kind
it is recommended to make it unusable as you cut
the electric cord, after you have disconnected it
from the mains. It is also recommended all hazards,
related to the appliance to be checked. That is
very important if there is a chance the discarded
appliance to be used for play by children.
•
You should never keep the appliance unnecessarily
plugged-in. Disconnect the appliance from the
mains if you do not intend to use it for a long time.
•
In order to avoid any overheating of the electric
cord it is recommended to unreel the whole electric
cord.
•
Warning: Do not use this appliance with a
programmer, counter or another device which can
automatically turn it on because if the appliance is
covered or incorrectly positioned there is a danger
of fire.
•
Place the electric cord in such a way that it does
not hamper the movement of people and not
to be stepped on! You must use only approved
connection blocks, which are suitable for the
appliance, i.e. there is a sign of compliance!
•
The electric cord must not be in touch with the hot
parts of the appliance!
•
You must never move the appliance by pulling it by
its electric cord. You must never use the electric cord
for moving of other objects.
•
Do not reel the electric cord round the appliance!
Do not use the appliance with its electric cord
reeled – this is also valid if a cable drum is used!
•
Do not press the cord and do not stretch it by sharp
edges. Do not place the cord over hot plates or in
open fire!
•
This appliance is designed to be mounted on a wall.
Keep a distance of 1.8 m from the floor and at least
25 сm from both corners of the wall when installing.
Do not install/place the appliance on the floor.
English
All manuals and user guides at all-guides.com
STRUCTURE AND COMPONENTS
INSTALLATION INSTRUCTIONS
The heater must be mounted on a wall before usage.
The sequence of mounting the appliance is as follows:
1.
Body
Air outlet
Remote
control
Select the place for installation while observing the
requirements described in the beginning of the
manual.
Usage and Storage Instructions
EN
Air inlet
Control panel
3
Tabla de contenido
