Tabla de contenido
28
LED DERBY DSL1
Display
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Display Functions
Press the MENU button to access menu options, keep pressing MENU to toggle menu items. Press the ENTER button to access desired
functions and the display will flash, then use the UP/DOWN buttons to navigate and select the desire setting. Press ENTER to save and
confirm, or press MENU to go back without saving.
The main functions are as follows:
Item
No.
Silkscreen
Function
Activates main menu and toggles
1
MENU
between menu items. Closes an
open submenu without saving
Decreases the displayed value by
2
DOWN
one/ Navigate function
Button:
Increases the displayed value
3
UP
by one/ Navigate function
Enter selected function/
4
ENTER
Confirm and save
5
DMX
Flashes when in DMX mode
6
MASTER
Flashes when in MASTER Mode
LED:
7
SLAVE
Flashes when in SLAVE Mode
Flashes when in
8
SOUND
Sound Active Mode
Menu
Options and Settings
Description
Addr
A001-512
UP/Down to select from address 1 to 512
ChAn
2Ch/6Ch
DMX Channel selection 2/ 6 Channel mode
MASL
MASt
Activate MASTER (HOST) mode option
SLAv
Activate SLAVE mode: when connected to DMX input, slave unit will replicate the master
(HOST) unit
Auto
AutM-AutS
AutM
Activate Auto mode for derby and stobe automatic show
Autd
Activate Auto mode for derby automatic show
AutS
Activate Auto mode for strobe automatic show
SPEd
SP01-99
Select SP01 Min speed, SP99 Max speed
Stro
St-
St01-20
Activate strobe show mode. Select from 20 preset shows ST01-20
Sped
SP01-99
Show speed select SP01 Min speed, SP99 Max speed
dErb
dIM
d000-100
Derby manual mode select dimmer brightness from 0 = off, 100 = max
r
r000-r255
Derby manual mode select Red LED brightness from 0 = off, 255 = max
G
G000-G255
Derby manual mode select Green LED brightness from 0 = off, 255 = max
b
b000-b255
Derby manual mode select Blue LED brightness from 0 = off, 255 = max
U
U000-U255
Derby manual mode select White LED brightness from 0 = off, 255 = max
Stro
FS00-99
Derby manual mode select strobe frequency from FS00 = off, FS99= max strobe speed
rot
rt00-rt99
Derby manual mode select light rotation speed rt00 = off, rt99=max speed
SoUn
on
Turn SOUND CONTROL ON. The AUTO and Show mode will follow the rhythm of the music
oFF
Turn SOUND CONTROL mode OFF
Sens
S001-100
Select sound sensitivity of SOUND mode from low to 100 high
bLnD
no
when DMX signal is interrupted, it will go back to last selected mode
YES
when DMX signal is interrupted, it will black out
Led
on
The led display is always ON
oFF
The led display will turn off after 5-10 seconds. Touch any key to turn it back ON
Disp
dISP
The led display in forward direction
dSIP
The led display rotate 180 degree
tESt
tESt
Press ENTER to start test mode, light will perform routine test
FhrS
Press enter to show fixture run time
vEr
Press enter to show software version
rSt
no
Default
YES
Restart fixture
29
Quick Start Guide
Tabla de contenido
