Orbegozo EP 2350 Manual De Instrucciones página 8

EP 2350
accessories or nearest parts that move when machine is
used, assembled, disassembled or during cleaning.
PARTS OF THE PRODUCT
1. Transparent lid
2. Large squeezing cone
3. Small squeezing cone
4. Strainer
5. Juice container
6. Anti-drip juice spout
7. Spindle
8. Motor base
9. Cord storage (under unit)
BEFORE FIRST USE
• Make sure that all the product's packing has been removed.
• Before using the product for the first time, clean the parts that will
come into contact with food in the manner described in the
cleaning section.
ASSEMBLING OF CITRUS JUICER
2. Place the strainer on top of the juice container.
4. Place the transparent lid on top of the cone when not using your citrus juicer.
USING YOUR CITRUS JUICER
1. Unwrap the cord from the underneath the base.
2. Plug the cord into a standard electrical outlet.
3. Prepare your fruit by cutting it in half.
4. Remove the storage lid from the citrus juicer.
5. Place a glass or container under the juicer spout and make sure juice spout is in the down position.
Tip: the juice spout snaps ip for easy storage and to prevent dripping. The juice spout snaps down when
juicing directly into the glass.
6. Place the cut side of the fruit down over the cone, using moderate to firm pressure, press the fruit down
to start the juicing action. The cone will rotate clockwise until the pressure is released. By applying
pressure again, the cone rotates counter clockwise.
1. Place the juice container onto the spindle of the motor base.
3. Choose a cone size and lower i ton top of strainer.
a. The small cone is perfect for lemons, limes and other small fruits.
b. The large cone is great for oranges, grapefruits and other large fruits.
Note: when using the large cone, place the small one inside it.
8