Idiomas disponibles
Idiomas disponibles
Tabla de contenido
KIT COMPONENTS
• A) Radio housing • B) Radio brackets
A
Metra. The World's Best Kits.
®
All manuals and user guides at all-guides.com
Kia Sorento
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black to match the factory finish
B
MetraOnline.com
2011-2013
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
95-7340B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: 40-KI11
TOOLS REQUIRED
• Phillips screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 5/21/18 INST95-7340B
Tabla de contenido
Manuales relacionados para Metra 95-7340B
Resumen de contenidos para Metra 95-7340B
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/21/18 INST95-7340B...
-
Página 2: Dash Disassembly
All manuals and user guides at all-guides.com DASH DISASSEMBLY 1. Remove shifter knob. (Figure A) 2. Remove the shifter surround panel. (Figure B) 3. Remove panel under the heater and air climate controls. (Figure C) 4. Remove (2) Phillips screws from bottom and remove center fascia panel. (Figure D) 5. Remove (4) Phillips screws securing the heater and air climate controls. (Figure E) (Figure A) (Figure B) (Figure C) 6. Remove (4) Phillips screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure F) Continue to Kit Assembly (Figure D) (Figure E) (Figure F) 1.800.221.0932 MetraOnline.com... -
Página 3: Kit Assembly
All manuals and user guides at all-guides.com KIT ASSEMBLY 1. Attach the radio brackets to the radio housing. (Figure A) 2. Slide the radio into the bracket/radio housing assembly from the rear, then secure the radio to the assembly using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash. Metra recommends using the proper mating (Figure A) (Figure B) adapters from Metra and/or AXXESS. 4. Secure the radio assembly to the dash using the factory screws, then reassemble the dash in reverse order of disassembly to complete the installation REV. 5/21/2018 INST95-7340B... - Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/21/18 INST95-7340B...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/21/18 INST95-7340B...
-
Página 6: Desmontaje Del Tablero
All manuals and user guides at all-guides.com DESMONTAJE DEL TABLERO 1. Retire la palanca de cambios. (Figura A) 2. Retire el panel envolvente shifter. (Figura B) 3. Retire el panel debajo del calentador y controles de temperatura del aire. (Figura C) 4. Retire (2) tornillos Phillips de la parte inferior y quitar salpicadero central. (Figura D) 5. Retire (4) tornillos Phillips asegurar el (Figura A) (Figura B) (Figura C) calentador y el control de temperatura del aire. (Figura E) 6. Quite los (4) tornillos que sostienen el radio. Deslice el radio hacia afuera, luego desconecte y retire la radio. (Figura F) Continuará al Ensamble del Kit (Figura D) (Figura E) (Figura F) 1.800.221.0932 MetraOnline.com... -
Página 7: Ensamble Del Kit
All manuals and user guides at all-guides.com ENSAMBLE DEL KIT 1. Una los soportes del radio a la carcasa del radio. (Figura A) 2. Slide the radio into the bracket/radio housing assembly from the rear and secure the radio to the assembly using the screws supplied with the radio. (Figura B) 3. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores (Figura A) (Figura B) adecuados de acoplamiento de Metra y/o de AXXESS. 4. Asegure el ensamble de la radio al tablero con los tornillos de fábrica, luego vuelva a ensamblar el tablero en orden inverso al del desmontaje para completar la instalación. REV. 5/21/2018 INST95-7340B... - Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/21/18 INST95-7340B...