Safety Instructions; General Safety; Operating The Device Safely; Scope Of Delivery - Waeco MOBITRONIC MSI-100 Instrucciones D’uso

MSI-100.book Seite 11 Freitag, 1. Juli 2005 2:36 14
Smart Inverter MSI-100
2

Safety instructions

2.1

General safety

Only connect the device using the connection cable to the 12 V cigarette lighter or
the 12 V on-board socket of the vehicle.
Do not connect the 230 V output of the inverter to a different 230 V source.
Always disconnect the power supply when working on the inverter.
Note that even after the fuse triggers, parts of the inverter remain live.
Do not pull the plug out of the cigarette lighter by the cable.
If the cable is damaged, it must be replaced to prevent possible electrical hazards.
Do not operate the device if it is visibly damaged.
This device may only be repaired by specialist personnel. Inadequate repairs can
lead to considerable hazards.
Should your device need to be repaired, please contact WAECO customer services.
Pull out the plug:
– Before cleaning and care
– After use
Ensure that the ventilation slots are not covered.
Keep the inverter out of the reach of children.
2.2

Operating the device safely

When using the device in a vehicle, make sure that it does not impair operation of the
vehicle.
Before starting the device ensure that the power supply line and the plug are dry.
Never start the device when your hands are wet.
Only operate the device when you or another person can attend to it.
Do not operate the device on hot surfaces.
Do not operate the device near flames or other heat sources (heating, direct sunlight,
gas ovens etc.).
Do not immerse the device in water.
Protect the device and the cable against heat and moisture.
WAECO cannot be held liable for damage resulting from improper usage or incor-
rect operation.
3

Scope of delivery

Quan-
Description
tity
1 MSI-100 inverter with built-in connection cable for 12 Volt cigarette lighter or
12 Volt on-board socket
1 Operating manual
Safety instructions
11