Haier HADD9SS6B Manual De Instrucciones página 8

2.1 Press the power button
downwards, the hood will stop moving, with motor keeping running. Press the power
button again, the hood will move again.
3. Motor on/off and speed setting:
3.1 Touch the speed button
3.2、How to set the speed? Touch this area
finger sliding on it. When your finger stops at the first or second point, the motor will
run at the lowest speed; when your finger stops at the third or fourth point, the motor
will run at the second speed; when your finger stops at the fifth or sixth point, the
motor will run at the third speed; when your finger stops at the seventh or eighth point,
the motor will run at the highest speed.
4. Lighting: :
4.1. After the hood slides up, the lights will turn on automatically in 8-10 seconds.
4.2 Touch the button of light
again, the lights will turn off.
4.3 When you touch the button of light
button to control the light intensity when the pilot light is flashing. When enter into
the controlling of light intensity, the silde button
is 8 speeds of slide button when lighting, every speed means one light intensity. When
touch slide button
corresponding light intensity. It can also use the manual keys by touching the button
to operate the hoods on one pilot light and it will be on in corresponding light
intensity. The pilot light will stop flashing after 15s if no function adjustment.
5. Timer button
5.1 Touch timer button
timer working. When the pilot light of timer is flashing, slide button
timer section. There are eight sections of timer button when timer is working, they are:
5-10-15-20-25-30-35-40, touch the timer button
confirm the timer section. Or, enter into timer working automatically 5s later. The motor
and light are off automatically when finish the timer, the hood will enter into standby,
the decorative cover will close automatically.
5.2 Use the timer function again when keep power on, touch the timer button but
without time setting, the hood will keep the time which setted on last time. It will
decrease by second after 5s.It will work as new time after new setting.
Touch the speed button or control the light intensity when timer is working, the timer
function will cancel automatically.
, when the hood is coming upwards or going
, the motor will turn on; touch it again, it will turn off.
, lights will turn off. Touch the light button
, the pilot light is flashing. Slide the
and slide to one light and it will be on, the light will be on in
when light or motor is working; the hood will enter into
7
control the light intensity. There
to enter into timer working when
, with your
to select the