Frequently Asked Questions (Faqs) - Marmitek IR Control 10 Modo De Empleo

5 Frequently asked questions (FAQs)

The A/V equipment does not respond to signals from my remote control.
The IR receiver has a receiving sensitivity of about 10 metres with an acceptance

angle of 90 degrees. Range is also dependent on the remote control used.
 If the 'IR data' light on the IR Receiver is continuously illuminated, the IR receiver
is probably being disrupted by another infrared signal. Try to locate the IR receiver
so that it encounters as little disruption as possible from, for example, direct
sunlight, Flat Screen TVs, (LCD, Plasma, LED), fluorescent lighting or energy-
efficient light bulbs.
The IR receiver works with all standard (infrared) remote controls. The only

exception (known to us) is Bang & Olufsen (B&O).
Ensure that the IR receiver and the IR extender cable are correctly connected and

that these are plugged in properly.
Some IR windows from set-top and satellite boxes are very sensitive and are

easily disrupted. These devices then receive too much infrared light and will either
work badly or not work at all. Relocate the IR LED so that less infrared light is
received via the IR window.
Do you have other questions that have not been resolved by the above information?
Please go to www.marmitek.com
IR Control 10™ 9