Metrohm 774 Oven Sample Processor Manual De Instrucciones página 108

5 Descripción detallada
E40
E41
E42
E43
E44
E45
E50...E59
E60...E82
E121
E137
E154
E163
E165
E168
E169
E201
E202
E206
E207
E208
102
RS Send Errors:
DSR=OFF. No proper handshake for more than 1s. Exit: <QUIT>. Is the
receiver switched on and ready to receive?
DCD=ON. No proper handshake for more than 1s. Exit: <QUIT>. Is the
receiver switched on and ready to receive?
CTS=OFF. No proper handshake for more than 1s. Exit: <QUIT>. Is the
receiver switched on and ready to receive?
Transmission has been interrupted for at least 3 s with XOFF.
Exit: send XON or <QUIT>.
The RS-interface parameters are no longer identical for both instruments.
Re-set.
The receive buffer of the instrument contains an incomplete command (L F
missing). Transmission is therefore blocked.
Exit: send L F or <QUIT>.
I/O-Test error
RS232-Test error
Device-specific errors:
Measuring point list full
Method memory full
Temperature not reached / HEATER timeout
Gas flow too low
Max. temperature reached
Temperature sensor defect
Flowmeter defect
Changer function error (div.)
Dosimat function error
Gas flow too high
Error list full
SCAN timeout
774 Oven Sample Processor, Instrucciones para el uso