Display Backlight; Headphone Socket - Sangean PR-D4 Instrucciones De Manejo

All manuals and user guides at all-guides.com

Display backlight

Press any buttons will illuminate the LCD display for approx.
15 seconds. During scanning stations and alarm activated,
will also automatically illuminate the display.
Setting tuning step
Tuning steps on some countries are different from where you
purchase the radio. If you buy the radio in Europe and intend to use
in Northern America or some Southern American countries,
you may have to adjust tuning step so the radio may continue
to serve you well.
While radio is switched off, long press Step/Band button for more
than 2 seconds will first show current FM tuning step.
Continue pressing Step/Band button for approx. another 5 seconds
until display FM and 50 kHz (tuning step) flashing followed by a beep.
By pressing Tuning up/down button, you may adjust to 100 kHz per
tuning step.
After FM tuning step is reset, pressing Step/Band button again,
display will show MW and flash 9 kHz. By pressing Tuning up/down,
you may adjust to 10 kHz per tuning step. Complete the setting by
pressing Step/Band button.

Headphone socket

A 3.5mm headphone socket located on the left-hand of your radio
is provided for use with either headphones or an earpiece.
Inserting a plug automatically mutes the internal speaker.
11