Temperature Limitation; Technical Data - Hansgrohe AXOR Starck 10720 Serie Instrucciones De Montaje

Attention! The fitting must be installed, flushed and tested
after the valid norms!
Adjustment
Correction is necessary if the temperature measured at the
take off point differs from the temperature set on the scale.
To adjust temperature proceed as follows:
Turn the setting knob until water at a temperature of 38°
C comes out of the outlet. Loosen screw of setting knob.
Remove setting knob and turn to the 38° C position.
Attach setting knob again and tighten the screw (please
see page 69).

Temperature limitation

The temperature is limited by the safety check to 38°
C (100° F). If a higher temperature is required, it is
possible to override the safety stop by depressing the
safety button.
Safety Function
The desired maximum temperature for example max. 42°
C can be pre-set thanks to the safety function (please see
page 68).

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Rate of flow by 0,3 MPa
l/min
Test certificate:
Maintenance
There is no special maintenance for thermostats. The non
return valves () must be checked regularly according
to DIN EN 1717 in accordance with national or regional
regulations (at least once a year). At this time, please
also check the filter (1.1) situated on the MTC-thermo-
element (1). After assembling the MTC-thermo-element,
it is necessary to check the water temperature at the take
off point as described under the headline „adjustment".
Before the adjustment, please check, if the warm water
supply is activated and the maximum temperature of the
warm water is available at the take off point.
14
All manuals and user guides at all-guides.com
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max. 80° C
65° C
approx. 26
WRAS
MCA
English
To guarantee the smooth running of the thermostat, it is
necessary from time to time to turn the thermostat from
total hot to total cold.
Spare parts (see page 4+5)
1 handle for thermostat Starck
2 handle for thermostat Carlton „lever"
3 handle for thermostat Carlton „cross" 17994XXX
4 handle for thermostat Steel
5 handle for thermostat Allegroh
6 handle for thermostat Terrano „lever" 37391XXX
7 handle for thermostat Terrano „cross" 37994XXX
8 handle for thermostat
Uno/Citterio M
9 handle for thermostat Montreux
10 screw cover for cold / hot water
11 handle for thermostat Citterio „lever"
12 handle for thermostat Citterio „cross"
13 handle for thermostat Massaud
14 face plate Massaud
15 face plate
16 face plate Citterio cpl.
17 face plate Starck X
18 face plate Montreux
face plate Citterio M
19
20 sleeve
21 thermostat cartridge
22 noise reduction
23 non return valve
shut off unit with selector
24
25 sub plate
26 fixing screw
27 sleeve
28 handle Starck/Citterio
Massaud/Citterio M
29 handle Uno/Terrano/Steel
30 handle Carlton/Allegroh
31 handle Montreux
32 extension set 25 mm
33 extension set 22 mm
34 extension set 22 mm
Citterio / Starck X
35 extension set 22 mm Citterio M
36 adapter for handle
37 adapter for handle
38 sleeve Massaud
adapter for handle Massaud
39
40 sealing set
41 screw
10391XXX
17391XXX
35391800
36391XXX
38391XXX
16594XXX
97987000
39994XXX
39391XXX
18097000
98688000
96551XXX
96751XXX
97926000
98638XXX
98919000
96439XXX
94282000
94073000
94074000
96509000
96447000
96454000
96446XXX
96520XXX
96421XXX
96449XXX
98637XXX
13595000
13596XXX
97407XXX
98860000
96435000
96451000
98734000
98701000
95037000
96525000