Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk S2 L Manual De Instrucciones

S2 / S3 / E-VAC2000 / BDC1330

Vacuum Cleaner Parts and Labels

1. Identification plate which includes:
Model code, Class (L - M - H), Technical Specifications
(see table on page 6), Serial N°., CE Mark, Year of
manufacture, Nominal network voltage.
2. Dust container
3. Dust container release lever
4. Inlet
5. Inlet (only for Class M - H vacuum cleaners).
6. Inlet plug
7. Accessories compartment
8. Warning label for ClassL -M - H vacuum cleaners.
9.
Outlet
10. Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
off (see also par. "Primary filter shaker").
11. Plug for connecting the vacuum cleaner to an electrical
socket.
1. Class L label
2. Class M label
3. Class H label
The class L and M labels contain pictograms with the
following meanings:
This vacuum cleaner contains dust
hazardous for the health.
Only authorised personnel wearing suitable
personal protective equipment should
empty and service the vacuum cleaner, including
removing the means used to vacuum the dust. Do not
use without the complete filter system in place.
The class H label contains the above text.
GB
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4 - Fig. 1) and blown out through the
outlet (9 - Fig. 1).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the authorised hoses are given in the
technical specifications table.
The vacuum cleaner is equipped with a primary filter which
enables it to be used for the majority of applications.
Besides the primary filter, which retains the most common
types of dust, the vacuum cleaner can be fitted with a
secondary filter (absolute H class) with a higher filtering
capacity for fine dusts and dusts that are hazardous to health.
C343

Vacuum cleaner description

Figure 1
Figure 2
WARNING!

Optional kits

Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optionals are included in the
conversion kit.
WARNING!
Use only supplied and authorized genuine spare parts.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
S2 L - M - H
Model
(40 L)
A (mm)
700
B (mm) 860
C (mm) 1350
Weight with
80
packing (kg)

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
4
Figure 3
S3 L - M - H
S3 L - M - H
E-VAC2000
BDC1330
BDC1330
(50 L)
(100 L)
700 700
860 860
1750 1750
86 89
01/2015