Getting Started - ProMed 4030 SX Manual De Instrucciones

G S
ETTING TARTED
DE
1. The unit is supplied with a permanently attached mains lead.
US
After plugging the unit into the mains outlet, turn it on with
the aid of the black power switch
FR
2. Setting the speed:
IT
Press on the membrane keyboard (6) to select the desired
ES
speed (rpm). For example, if you wish to set a speed of
15,000 rpm for a burr, tap on the button (6) until "15" is
NL
shown on the 2-digit display.
Speed can be set as follows and is shown on the display:
RU
From the initial speed of 2,000 rpm
to 16,000 rpm
PL
At speeds between 16,000 rpm
and 30,000 rpm
SE
FI
.
(1)
in 1,000 rpm intervals
in 2,000 rpm intervals
The speed intervals are quickly run through when the button
is continually pressed. Speed can also be quickly reduced by
pushing button (5).
Standby function
Button (3) offers a "pause - standby - function". The set values
remain the same throughout the pause duration, with the last
selected speed blinking in the display. When this button is
pressed once more, the device starts to operate again using the
previous settings.
3. Setting the suction power
The suction power is increased or reduced by pressing buttons
(7) or (8). In most cases, the middle setting provides sufficient
suction power. The strength of the suction power is shown on
the LED display (9) (1-10, i.e., 10-100%).