Maintenance And Environmental Protection; Service Instructions - Meister BAS 108 LIO Traducción De Las Instrucciones De Servicio Originales

5401010-Akku-Bohrs-man.qxd
Rotation stop
The rotation spindle is locked in the
centre position of the right/left rotation
switch (4),
a) To undo tight screw connections in
manual operation,
b) To act as safety position when taking
a break or changing a bit or a drill
In the rotation stop mode, the device
cannot be put into operation using the
on/off switch.
Torque setting
The drill screwdriver has a 23-stage torque
setting (2) in order to avoid damage to the
bolt or drilling heads. By rotating the head
on your drill screwdriver, you can adjust
the stage necessary in each case, from
1 (easily turned screw) to max. (stiff screw-
driving/drilling
torque most favourable for the respective
work.
90° degree position
The 90° degree position (Figure 7)
enables, when the drill/screwdriver is
held horizontally, and thanks to the spirit
level integrated in the housing (9), the
exact positioning of the device at a
right-angle for vertical drilling.
10 – Maintenance and
environmental
protection
Clean the case only with a damp cloth –
Do not use solvents! Then dry well. To
maintain capacity, we recommend
completely discharging and recharging
the battery every two months. Store
only fully charged batteries. They should
24.03.2010 11:45 Uhr
All manuals and user guides at all-guides.com
). Always select the
Seite 65
therefore be recharged from time to
time. The place of storage must be dry;
the ambient temperature must not fall
below 0 °C or rise above 40 °C.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in the
household waste! They are to be
collected separately, in accordance
with the 2002/96 EC
directive for the disposal
of electrical and
electronic waste, and
sent for proper and
environmentally-friendly
recycling.
ATTENTION! Batteries must be
removed from battery-powered
tools and disposed of separately in
accordance with relevant waste-battery
regulations. Batteries must never be
disposed of with domestic waste!
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please contact
your municipal authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• Meisterbasic devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Please note additional hints given in
the operating instructions.
65