Technical Specifications; Material; Temperature Limits - Ambu ResCue Mask Instrucciones De Uso

• After cleaning the ResCue mask should be visually inspected. If any damages are
seen the ResCue Mask should be discarded.
Clean the internal side of the case with alcohol 95% and let dry before placing the
clean mask back in the case.
Used products must be disposed of according to local procedures.
CAUTIONS
• Do not boil, steam or gas autoclave this device!
NOTE
It is the user's responsibility to evaluate the effectiveness of any deviation from
the instructions provided.

7. Technical specifications

Ambu ResCue Mask is in conformity with Council Directive 93/42/EEC concerning
Medical Devices.
Connector Dimensions:
Mask: Able to be connected to a standard 22 mm male connector
Valve: Able to be connected to a standard 15 mm male connector
Dimensions: 138 mm x 113 mm x 50 mm
Weight: Approximately 117 g

8. Material

Mask: Polyvinylchloride
Valve: Styrene-Butadiene Copolymers, Polypropylene and silicone
Hard case: Polypropylene
Soft case: Polyurethane, Ethylene Vinyl Acetate and Micro Fabric
Bag: Nylon

9. Temperature limits

Operating: -18 °C (-1 °F) to 50 °C (122 °F)
Storage: Tested at - 40 °C (-40 °F) and + 70 °C (158 °F)
6