Volkswagen 3AB 055 204 Instrucciones De Montaje página 68

4. On vehicles with lane change assist, the control unit must be coded as follows:
Vehicle self-diagnosis
-
o 3C lane change assist
5. On vehicles with front sensors, the control unit must be coded as follows:
- Vehicle self-diagnosis
o A5 front sensors
8. On vehicles with a 2.0 TDI common rail motor encode the control unit as follows:
- Vehicle self-diagnosis
o 01 Motor electronics
Only for Australia:
9. On vehicles in Australia encode the trailer module as follows:
- Vehicle self-diagnosis
o 69 trailer module
4
All manuals and user guides at all-guides.com
code control unit
Change the code value: Bit sample xx1xxxx (x: enter the
•
available values in the entry field). To do this, switch to entry
mode [BIN].
o press „Q" and „continue"
coding
Master
•
clear text encoding
•
trailer
•
Coding
Master
•
Binary coding
o
coding
Master
•
Change code: Byte 0 from 01 to 03
•
press „Q" and „continue"
Kodieranweisung - 001 - 41/11
with hitch
press „continue"
Enter no value at the check digit and click on
"Continue"
Press „OK" to confirm
•
o Change code value:
Byte 5: read code value
Add 1 at the first digit
press „Q" and „continue"
Example: coding old = 64
Coding new = 74
Passat B7 Limousine & Variant MY11