Idiomas disponibles
Idiomas disponibles
4
INTRODUCTION: ABOUT YOUR LIFT
The Oxford/Hoyer Presence is an electrically operated patient lift. Each Presence lift is
fully assembled load tested and certified before being packed/shipped.
The packing consists of a strong, purpose built carton that is used for both export and
domestic markets to ensure the safe arrival of the lift.
A number of documents are supplied in a wallet, and packed with each lift and should
be kept safely for future reference.
TEST CERTIFICATE
•
DEALER GUARANTEE CARD
•
PACKING CHECK LIST
•
The TEST CERTIFICATE is an important document and will be required for your insurance
records. It is valid for six months and after it has expired the lift should be inspected
and serviced per the maintenance schedule.
Servicing and periodic testing can be carried out by your authorised supplier. Please
ensure your lift is included in their maintenance schedule. If you are at all unsure
what your local market servicing requirements are, please check with your dealer
and/or a local government agency.
The Oxford/Hoyer Presence is suitable for the following CATEGORIES of lift within the
working parameters of the lifts specified in the TECHNICAL SPECIFICATIONS.
Category A - Wheelchair
Category B - Bed
Category C - Bath (dependent upon setting)
Category D - Toilet/Shower Chair
Category E - Floor
Category F - 90 degree Rotation
The Oxford/Hoyer Presence is suitable for patients in the SITTING, SITTING/RECUMBENT
and RECUMBENT positions. The slings suitable for this device are listed as follows:
Oxford/Hoyer Quick fit sling
•
Oxford/Hoyer Quick fit deluxe sling
•
Oxford/Hoyer Access sling
•
The CE mark:
The Oxford/Hoyer Presence carries the CE mark and complies
with the following EC directives:
• Medical Device Directive (93/42/EEC)
• EMC Directive (89/336/EEC)
• Low Voltage Directive (73/23/EEC)
294000.10007 Rev. C
E n g l i s h
USER MANUAL
•
CUSTOMER SATISFACTION CARD
•
Oxford/Hoyer Full back sling
•
Oxford/Hoyer Long seat sling
•
Oxford/Hoyer Four point comfort sling & pad
•
E n g l i s h
ASSEMBLY AND COMMISSIONING INSTRUCTIONS
CARTON CONTENTS
Place the carton in a clear working area and open carefully. The carton contains:
•
OXFORD/HOYER PRESENCE LIFT
•
WALLET CONTAINING DOCUMENTS
•
HAND CONTROL
•
BATTERY PACK
•
CHARGING LEAD
•
DESK TOP CHARGER/STAND
The Oxford/Hoyer Presence is heavy and will need to be lifted with care.
You may need assistance to lift the Oxford/Hoyer Presence from the carton.
ASSEMBLY INSTRUCTIONS
Remove all the parts from the carton and place on the floor, taking care to protect the
finish from damage.
1.
Place the chassis in a clear space and apply the rear bakes.
2.
Fit the mast and boom assembly into the chassis socket
WARNING
294000.10007 Rev. C
5
Capítulos
