Brentwood Appliances H-Q800W Manual Del Usuario página 5

Tip-over switch: The heater will be automatically shut off by a built-in safety switch
when it is tipped over. If this occurs, turn the heater OFF, unplug it, put the heater
back to upright position and plug it back in.
CLEANING AND MAINTENANCE
WARNING: Always unplug the cord before moving or servicing, maintenance.
Do not immerse heater in water.
1. Unplug the heater from the power source and let it cool down
2. Do not remove grill guard or allow heater to be operated without grill guard in
place.
3. Clean the body with a clean, soft lightly damp cloth to gently wipe off the dirt
from the surface of the heater. You may use a mild detergent if necessary. After
cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
4. Wait until the heater is completely dry before use.
5. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brusher
to clean the heater. This may cause damage or deterioration to the surface of the
heater.
6. Store the heater in a cool, dry location when not in use. To prevent dust and dirt
build-up, use the original packing to repack the unit.
TROUBLESHOOTING
If your heater fails to operate, perform the following:
1.
Review this manual to ensure that you understand the basic operations and
features of your heater.
2.
Check your household circuit breaker or fuse.
3.
Check for obstructions at the intake and exhaust vents.
•
If obstructions are present, refer to the instructions for resetting your heater
when the Overheat Protection System has been activated.
•
If no obstructions are present, and your heater still does not operate normally,
turn the Power Control Switch to the '0' position, disconnect the power cord from
the electrical outlet, and consult an authorized repair technician.
5