X-Ray Exposure - VATECH PaX-i PLUS PCH-30CS Manual Del Usuario

3. Acquiring PANO Images
3.3

X-ray Exposure

1. Get out of the X-ray room and close the door.
2. Press and hold down the Exposure Switch until image acquisition is completed.
36
If an emergency occurs during image acquisition, release

the Exposure Switch to cease X-ray emission.
The operator shall observe the X-ray safety regulations

applicable to his/her area at all times during the operation
of this equipment.
The operator must keep vocal/visual contact with the

patient at all times during image acquisition process.
Do not operate the PC during exposure. Doing so may

cause the system to malfunction.
Let the patient close the eyes during the operation.

To acquire optimized images, instruct the patient to hold

his/her breath and not to swallow. Also don't let the
patient move until the Temple Supports are open.
The image appears on the screen.
PaX-i Plus User Manual