Craftmade HC52 Instrucciones De Instalación página 7

Electrical Connections Continued...
White
Black
Black
Fan
Switch
Black
Light
Switch
Blue
Figure C
Common Problems
: Fan Will not Start
1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
: Fan is Excessively Noisy
1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or
a variable speed type.
: Fan Wobbles
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near
the motor end. All of the blades should be the same weight to prevent
fan from wobbling.
4. A balancing kit is enclosed if needed.
The weight of the complete fan, including assembly hardware is:
ODEL PRODUCT MODEL
O52 FC52
O42 HC42/36
O52 HC52
All manuals and user guides at all-guides.com
Ground
Green
White
Optional
Light
WEIGHT (LBS/KG)
14.50/6.6
11.50/5.2
14.50/6.6
HC52
Instrucciones de instalación
Modelos: HC52, FC52, HC42
HC52
Ventiladores de
Montaje al Ras
FC52
MEJOR DISEÑO
HC42
®