Craftmade HC52 Instrucciones De Instalación página 3

tion
tant: When using an existing outlet box, be sure the box is securely attached
building structure and can support the full weight of the fan. Failure to do
result in serious injury or death.
Step 1
circuit breakers and wall switch to the fan
ne leads.
ning: Failure to disconnect power supply prior to
lation may result in serious injury or death.To reduce
sk of shock, this fan must be installed with an
ing wall control/switch.
Step 2
make sure blades are at
rom any obstruction.
wnrod length to
des are at least
he floor.
(2.1m)
Min.
All manuals and user guides at all-guides.com
30"
0.75m
Min.
84"
3
Prior to securing mounting bracket, screw "J" hook (S9) into ceiling outlet
box as a secondary support means. Secure mounting plate (#1) using screws
and washers (S2) directly to the outlet box. If not mounting to an outlet
box, use wood screws (S1) and mount securely to a beam or joist.
NOTE: Do not mount directly to sheet rock or ceiling tile.
NOTE: J Hook installation is a Canadian requirement only.
"J" Hook (S9)
Ceiling
OUTLET BOX
Screws & Washers
for Mounting Plate (S2)
4
Hang the fan motor/mounting bracket (#2) onto the hook that is positioned
on the mounting plate (#1).
Mounting Plate (#1)
Fan Motor Mounting Bracket (#2)
Step 3
Support Beam
Mounting Plate (#1)
Wood Screws
& Washers (S1)
Step 4