Craftmade HC52 Instrucciones De Instalación página 4

Step 5
fan wires to ceiling wires: white fan wire to white outlet wire,
ck and green to green. Wire connectors (S6) are provided for
nience. If an additional blue wire is present then also connect
e to the black wire. (Optional light kit may be wired to individual
es, if desired.)
nnections are made, turn splices upward and push carefully into
Separate blue and black wires on one side of the box, and white
wires on the other side.
colored wires coming from the top of the motor (including
e).
connectors that are not pushed up into the outlet box may in time sag and
e top of the motor housing. This sound can be mistaken for bearing noise.
ok (S9)
Ground
Neutral)
Power)
White
Black
Blue
re Connnections
x Fan wires
Black
(Hot wire for fan)
Green
(Ground wire)
White
(Neutral wire)
Blue
(Light kit wire)
All manuals and user guides at all-guides.com
Wire Connectors (S6)
Ground (Green)
6
For added security, attach safety cable from fan unit to "J" hook (S9) in
outlet box. Secure by looping zip tie (S10) through safety cable and "J"
hook. Tighten zip tie securely. Lift fan onto the mounting bracket (#1).
"J" Hook (S9)
Zip Tie (S10)
Safety Cable
NOTE: Parts furnished will allow
you to install your fan at up to a 35°
angle. Angles greater than 35° will
require a 45° angle adapter (see
dealer). NOTE: J Hook installation
is a Canadian requirement only.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
Step 6
"J" Hook (S9)