Horizon Global 76322 Instrucciones De Instalación página 4

1. Raise vehicle – Raise car on ramps or hoist. Assure that vehicle is blocked
and that it is safe to be underneath.
3. Remove large trim piece – Remove the larger piece of trim now visible by
prying back the two (2) plastic clips holding it onto the frame and return to
customer.
©2019 Horizon Global Americas Inc. – Printed in Mexico
Clip
2. Remove bumper trim – Remove the thin, black trim piece clipped onto
the bottom of the bumper. Pop out the two (2) plastic clips that hold the
trim piece on and return to customer.
4. Remove exhaust cover – Remove the driver side exhaust port cover by
removing the two (2) plastic clips on the bottom and opening the two (2)
clips on top. Set the cover aside.
Clip
Sheet 4 of 15 76322NP
Clip
Clip
9-18-19 Rev. A