Idiomas disponibles
Idiomas disponibles
TOOL
1 Camshaft setting bar
to be used as OEM 303-1552
INTENDED USE
This tool is used to lock the camshaft when removing / replacing the timing chain.
The tool is suitable for e.g. following Ford models / engines:
1.6L EcoBoost Sigma petrol engines, built in e.g. Galaxy, S-Max, Mondeo, C-Max, Focus, Fiesta,
Kuga, Transit, Tourneo Connect.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATION
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
USE
Camshaft alignment tool (1)
to be used as OEM EN-51415
Use this tool to lock the camshafts in their
distributing position before removing the
timing chain from the camshaft.
Ensure camshaft alignment tool abuts
cylinder head.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Camshaft Alignment Tool
for Ford 1.6 EcoBoost
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 9692
1
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
