Alarm Function - AEG IMS 4439 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
ENGLISH
44

Alarm Function

You can set two alarm times; proceed as follows:
• Press the
button (1/21) to switch the device off.
• Press and hold the AL1 button (10/1) or the AL2 but-
ton (10/3) for approx. 2 sec. The currently set wake-up
time appears on the display. The hours flash.
• Press the / buttons to set the hours. Press the AL1
or AL2 button to confirm. The minutes flash.
• Set the minutes, press the / buttons. Press AL1 or
AL2 button to confirm.
• Using the / buttons, select how you want to be
woken. Confirm your selection with the AL1 or AL2
button.
The following options are available:
- " " (Buzzer):
An alarm sounds when the wake-up time is reached.
The volume increases slowly.
- " " (Radio):
As soon as your set wake-up time is reached, the
radio switches on. The last set channel will play. The
volume increases slowly.
- " " (iPod/iPhone):
CAUTION:
Before plugging in the iPod/iPhone, make sure
that the radio is not in iPod mode.
• Insert the adapter supplied with your iPod into
the dock (11). You can only ensure that the iPod
fits correctly into the iPod port if the adapter is
plugged in.
Insert your iPod or iPhone in the dock (11).
CAUTION:
Make sure that your iPod/iPhone is plugged
upright into the port. Do not bend or tilt the
iPod/iPhone whilst it is plugged into the port.
This may cause damage to the dock and/or
the iPod/iPhone.
• Playback from your iPod/iPhone starts in the
set mode at the set alarm time. The volume
increases slowly.
NOTE:
• Follow your iPod/iPhone manual to select
the desired mode
• If no iPod/iPhone is connected the device
wakes you in BUZZER mode.
• Finally select the maximum wake-up volume with the
/ buttons.
• Press the AL1 or AL2 button, " " or " " is displayed.
The first or second alarm time is activated.
Turn Off Alarm
Press the
button to turn off the alarm until the next
day.
Snooze Function
Press the SNOOZE button (7/20) to deactivate the alarm
for approx. 9 minutes.
Deactivate Alarm
• To deactivate the first alarm time, repeatedly press the
AL1 button (10/1) until " " disappears on the display.
• To deactivate the second alarm time, repeatedly press
the AL2 button (10/3) until " " disappears on the
display.
Sleep Timer (SLEEP button (7/20))
In ON mode, set the time for the device to automatically
switch to standby mode. Select between: 120, 90, 60, 30,
15 and OFF. Repeatedly press this button until the desired
time is displayed. SLEEP is displayed if the function is ac-
tivated. After the set time the device automatically turns
off.
Press the
button (1/21) to cancel this function. The
device switches to standby mode.
Music Playback from iPod/iPhone
(iPod/iPhone not supplied)
CAUTION:
Before plugging in the iPod/iPhone, make sure that the
radio is not in iPod/iPhone mode.
1. Insert the adapter supplied with your iPod into the
dock (11). You can only ensure that the iPod fits cor-
rectly into the iPod port if the adapter is plugged in.
2. Insert your iPod or iPhone into the dock (11).
CAUTION:
Make sure that your iPod/iPhone is plugged upright
into the port. Do not bend or tilt the iPod/iPhone
whilst it is plugged into the port.This may cause
damage to the dock or the iPod/iPhone.
3. Press the
button (1/21) to switch the device on.
Repeatedly press the FUNCTION button (5/14), until
"iPHONE" is displayed.
4. Depending on the iPod/iPhone Model, firstly release
the button lock and start playing music if necessary
with the
button (3/12).
5. Follow your iPod/iPhone manual for further use of the
controls.
CAUTION:
Return to radio mode before disconnecting your iPod/
iPhone from this device to avoid damages to your iPod/
iPhone.
Tabla de contenido
loading

Tabla de contenido