Hach 9525sc Degas System Manual Del Usuario página 17

Display/Key
1 2
6.1.2 Configure the control mode
Push to scroll through the options on the Operations menu. Push
display. For a description of the Operation menu options, refer to
To navigate the Operations menu, follow these steps:
1. Push to select a menu.
2. Push or to find an option.
3. Push to select the option.
4. Push and hold
Menu option
C.M1
h.Pr1
Table 2 Temperature controller
Name
Left display
Output 1 and Output 2, and Right
display
Up/Down arrow keys
Infinity key
Advance key
for two seconds to go back to the default display.
Table 3 Operations menu options
Name
Control mode
Heat power
Description
Shows the actual temperature.
In the Operations or Setup menu,
shows the process value or set
point data.
Output 1 and 2 shows which output
is set to on.
Right display shows the maximum
temperature. In the Operations or
Setup menu, shows the menu
display.
Selects new data when Advance
key is pushed.
Moves forward or backward through
software menus and parameters.
Starts and stops the timer.
Stops alarms.
Push to back up one level.
Push and hold for two seconds to
go back to the Operations menu.
Moves forward through parameter
prompts.
to go back to the default
Table 3.
Description
Shows the current control mode:
Off, Auto or Manual.
Shows the current heat output level.
English 17