Listening To The Radio - AEG MC 4411 Manual De Instrucciones

makes it impossible to guarantee full compatibility with all USB
storage media. For this reason there may be problems in rare
cases with playing back from USB storage media. This is not a
malfunction of the device.
1. In order to switch on the device please press the STANDBY/
ON / POWER switch (4/12).
2. Now press the FUNCTION button (6/8) to select the CARD-
USB mode.
3. Connect a USB storage medium.
4. Press PLAY/PAUSE (14/1) to play back the music data.
For operating instructions please see the section "Playing
CDs/MP3s".
NOTE:
• The FIND function is restricted.
• With the SD/MMC card inserted it is not possible to switch
over to the USB connection.
• By pressing the CARD-USB button (17 on the remote
control) you can also select the CARD-USB mode.
CAUTION:
Before removing the USB storage medium, switch the device
to TUNER operation using the TUNER/BAND button (2/13).
SD/MMC Card Slot (9)
1. If you would like to play back data on an SD/MMC card
please insert it into the opening provided.
2. Now press the FUNCTION button (6/8) to select the CARD-
USB mode.
3. Press PLAY/PAUSE (14/1) to play back the music data.
For operating instructions please see the section "Playing
CDs/MP3s".
NOTE:
• The FIND function is restricted.
• By pressing the CARD-USB button (17 on the remote
control) you can also select the CARD-USB mode.

Listening to the Radio

1. Press the FUNCTION button (6/8) to select between FM or
MW.
VHF = FM, Medium wave = MW (mono)
2. Tune in to the desired station with the help of the SKIP-UP
I /SKIP-DN I buttons (8/3).
3. The FM.ST control lamp ((ST)) (in the display) only lights up
if the selected station is being received in stereo quality. If
reception is too weak and there is noise on the station being
received, this lamp will fl icker. Try to improve reception by
turning and bending or twisting and altering the length of
the antenna (30). In the case of FM stations you can use
the STEREO/MONO/ESP button (11 on the remote control)
to switch between MONO and STEREO reception. Where
reception is bad we recommend switching to MONO.
05-MC 4411 AEG 51
4. An aerial is integrated into the device for the reception of
MW stations. The machine can be aligned to the station by
turning it. In this frequency band programs are transmitted in
„mono" only.
5. If you have found the desired station, press the CLOCK/
MEMORY button (10/6). The word MEMORY lights up and
the station memory number fl ashes.
6. In order to select the program location, press the PRE-
DN/PRE-UP buttons (4 on the remote control).
7. To store this position, press the CLOCK/MEMORY button
(10/6). Please note that the programme storage location
must be entered within fi ve seconds as the procedure is
then cancelled.
To select a stored station press the PRE-DN or PRE-UP button
(4 on the remote control).
NOTE:
By pressing the TUNER/BAND button (2/13) you can also
switch over to radio mode.
Playing CDs/MP3
This is how you play a CD
1. Press the FUNCTION button (6/8) repeatedly until „CD"
appears in the display.
2. In order to open the CD compartment (11), press the PUSH/
OPEN (open) button (12).
3. Insert an audio CD with the printed side facing upwards on
to the central cone so that the CD clicks into place and then
close the lid of the CD compartment.
4. AUDIO CDs:
In the display the symbols "Cd" and "ESP" appear together
with the number of tracks and the total playing time. Press
the PLAY/PAUSE button (14/1) to play back the CD. The CD
is played from the fi rst track onwards. The track currently
being played and the time that has elapsed are shown in
the display.
CDs in MP3 Format:
In the display the symbols "STOP" and "ESP" appear toge-
ther with the number of folders e.g. 04 and the total number
of tracks. Press the PLAY/PAUSE key (14/1) to play the CD.
The CD is played back from the fi rst track onwards and from
the fi rst folder. The song currently being played and the time
that has elapsed are shown in the display. With the PRE-DN
or PRE-UP (4 on the remote control) you can select the
individual folders.
5. To remove a CD, press the STOP key (17) (2 on the remote
control), open the CD deck with the PUSH/OPEN (open)
key (12) and take out the CD carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is inserted incorrectly or no disc is inserted, the
letters „CD READ", and „NO DISC" appear in the display.
• Playback of CDs produced by the user cannot be guaran-
teed due to the large variety of software and CD media
available.
51
05.02.2007, 11:09:36 Uhr