Seat Installation - Huffy Lil Cruzer Balance Manual De Instrucciones

WARNING:
"MIN-IN" (minimum insertion) mark
B
seat tube .
STEP 1
- INSERT SEAT POST INTO SEAT TUBE:
• If needed, loosen seat post clamp screw
the quick release lever
• Point the seat forward and put the seat post
the seat tube
the top of the seat tube as shown.
STEP 2
- BOLT SEAT CLAMP: (various models)
• With seat post
Tighten screw
without moving.
STEP 3
- QUICK RELEASE LEVER: (various models)
CAUTION
: Operate the quick release lever by HAND
ONLY - DO NOT USE TOOLS.
1. As needed, open and close the quick release lever
with one hand and tighten or loosen the adjusting
G
nut by hand, so that you fi rst feel resistance to the
quick release lever when it is in the "OPEN" position
1 .
2. Push the quick release lever to the "CLOSE" position
- It will take strong force to clamp securely so
2
that the quick release Lever lays against the seat
post clamp F
WARNING:
move the quick release lever securely to the "CLOSE"
position 2 . This ensures that the seat does not move
during normal operation.
REFLECTOR:
Position seat post refl ector (if equipped)
backwards. Tighten clamp screw.
10

Seat Installation

To prevent the seat coming loose and possible loss of control, the
E
.
B
with the "MIN-IN" marks BELOW
C inserted according to STEP 1 -
D securely so seat supports the rider
.
You must use strong force to
(as equipped)
A on the seat post must be BELOW the top of the
D or open
C
into
E
H
so it points straight
C
B
A
F
2
C
G
1
A
2
C
D
3
E
1
H