Tripp-Lite B119-002-UHD Manual Del Usuario página 5

Installation
5. Connect the external power supply to the
6. Turn on the power to the HDMI source
7. Switch between source devices via the
18-08-475-9337C3.indb 5
switch, and then plug it into a Tripp Lite
Surge Protector, Uninterruptible Power
Supply (UPS), or Power Distribution Unit
(PDU). The red Power LED and green
Input 1 LED will illuminate to indicate that
power is being received.
devices and display.
Select pushbutton on the unit or the
included remote control. You can also let
the Auto Switch functionality automatically
switch to ports that are powered on. When
multiple ports have powered on devices
connected to them, the lowest numbered
port will be switched to. Once the device
connected to the lowest numbered port is
powered off, the next powered on port in
line will be switched to.
5
9/13/2018 1:16:26 PM