Tensioning The Saw Chain (Quick Chain Tensioner); Checking Chain Tension; Chain Lubricant - Stihl MSA 160 C Manual De Instrucciones

Ocultar thumbs Ver también para MSA 160 C:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 150
English
Tensioning the Saw Chain
(quick chain tensioner)
1
2
For retensioning during operation:
Remove the battery from the
N
machine
Fold out the wings of the wing nut
N
and loosen the wing nut
Turn the adjusting wheel (1) to the
N
right as far as possible
Tighten the wing nut (2) by hand
N
Fold in the wings of the wing nut
N
Next step: Continue with "Check
N
chain tension"
A new saw chain must be retensioned
more frequently than one that has been
in use already for an extended period!
Check chain tension frequently –
N
see "Operating Instructions"
66
All manuals and user guides at all-guides.com

Checking Chain Tension

Remove the battery from the
N
machine
Put on protective gloves
N
Pull hand guard towards the front
N
handle until it engages audibly and
the hand guard is in the position ‚
– chain brake is released
The saw chain must lie against the
N
bottom of the bar and it must be
possible to pull it across the guide
bar by hand
if necessary, retension saw chain
N
A new saw chain must be retensioned
more frequently than one that has been
in use already for an extended period.
Check chain tension frequently, see
N
"Operating Instructions"

Chain Lubricant

For automatic and reliable lubrication of
the chain and guide bar – use only a
quality, environmentally compatible
chain and bar lubricant – preferably the
rapidly biodegradable STIHL Bioplus.
Biological chain oil must be sufficiently
resistant to aging (e. g., STIHL Bioplus).
Oil with a low resistance to aging tends
to turn to resin quickly. This results in
hard deposits that are difficult to remove,
especially in the area of the chain drive
and on the saw chain – .possibly even
causing the oil pump to seize.
The service life of the chain and guide
bar depends on the quality of the
lubricant – it is therefore essential to use
only a specially formulated chain oil.
Do not use waste oil! Prolonged and
repeated contact with waste oil can
cause skin cancer. It also harms the
environment!
Waste oil does not have the necessary
lubricant properties and is unsuitable for
chain lubrication.
MSA 160 C
Tabla de contenido
loading

Tabla de contenido