Package Contents; Safety Check - Bodypoint SH102-B1 Instrucciones Para El Usuario Y De Instalación

Arnés de pecho
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17

PACKAGE CONTENTS

• Chest Belt
• Cinch-Mount™ or Flat-Mount™ End Fittings
Optional mounting hardware available
from Bodypoint
• Cam Buckles (Art. No. FS034-2)
• FrameSaver Clamps (Art. No. HW303-B-2)
ADJUSTMENT
Position user in wheelchair and fasten the
pelvic support belt securely. With Chest Belt
properly adjusted and the strap tightened, it
should fit snug so the user's trunk is secure.
Small adjustments in fit are done by using the
adjustment strap. Large adjustment in fit are
accomplished at the end fittings.
INSTALLATION
Solid back wheelchair
1. Insert straps into end fittings. Wrap straps around
2. Attach end fittings to backrest. Mounting screws must
Ø 3/16"–1/4"
(5mm–6mm)
POSITIONING
Seat user in wheelchair and establish correct
posture with pelvic support belt. Determine
desired position for the Chest Belt. To reduce
the risk of strangulation and trunk instability,
the belt should be neither too high nor too
low. When choosing position, consider interfer-
ence with other devices.
backrest. Mark holes for reference.
have a minimum pullout strength of 200lbs/ 90kg.
Not included in package.
Flat-Mount End Fitting
Cinch-Mount End Fitting
Diagram 1
Diagram 3
#2 Phillips
Cinch-Mount™

SAFETY CHECK

When properly positioned in wheelchair, have
user lean forward and side to side to check fit.
Check for:
1. Normal operation of adjustment strap.
Diagram 2
Diagram 4
2. Comfort – If any rubbing occurs
relocate belt.
3. Position – If too high or too low,
adjust mounting location.
4. Interference with other devices – Relocate
belt as necessary to clear armrests,
accessory pads, or feeding tubes.
Flat-Mount™
en
X
Tabla de contenido
loading

Este manual también es adecuado para:

Sh102-b2

Tabla de contenido