Maxi-Cosi Quinny FREESTYLE XL COMFORT Modo De Empleo/Garantia página 9

Unfolding / folding (see illustrations 1 – 14)
To unfold
- When unfolding, first make sure that the subframe is clicked onto the frame (1).
- The frame has been secured by means of a handlebar safety lock to prevent it from unfolding during
transport.
- Release the lock by pulling the left handlebar safety lock in the direction of the arrow (2).
- Pull the handlebar upwards (3) until it "clicks" into the handlebar safety lock (4).
- Check this by pushing down on the handlebar.
- To adjust the height of the handlebar, push the release buttons at the same time (5,1) and rotate the
handlebar into the desired position (5,2).
Placing / removing the wheels
- The 2 wheels with the brake cylinder should be mounted as rear wheels.
- Press the button in the middle of the hubcap (6) while pushing the axle into the axle opening (7).
- Check to make sure the wheel is secure.
- Place the front/swivel wheel by pushing the button downwards (8,1) and then clicking the wheel into the
opening on the front (8,2).
- The swivel wheel can be adjusted into 2 positions: fixed or swivelling (9,1). To lock it into the fixed position,
rotate the swivel lock until 2 straight arrows appear in the display (9,2).
- The swivelling front wheel will right itself the moment the pram is pushed.
- Check the tyre pressure and inflate the tyre if necessary (see maintenance section for the maximum tyre
pressure allowance).
- To remove the rear wheels, press the button on the hubcap (6) and pull the wheel out of the axle opening
(10).
- To remove the swivel wheel, push down the button and pull the wheel out of the opening (11).
Folding
- IMPORTANT: Always remove the Quinny carrycot or Maxi-Cosi car seat before folding.
- IMPORTANT: It is advisable to remove the sun canopy before folding the pushchair.
- Apply the brake on the Freestyle 3 XL Comfort (see Using the parking brake).
- Fold up the sun canopy.
- Make sure the footrest is in the lowest position (see Footrest section).
- Remove the safety bar (see Placing / Removing the Safety Bar) and push the back of the pushchair seat
completely forward.
- Push the release buttons on the handlebar at the same time and rotate the handlebar downwards.
- Tilt up the fold lock above the right handlebar safety lock (12,1).
- Pull the left and right handlebar safety lock upwards (12,2) and push the handlebar forward until the Freestyle
3 XL Comfort is folded (13).
- Make sure that the handlebar safety lock "clicks" into the transport safety lock (14).
- Remove the wheels to make the pushchair even smaller.
Instructions for use (see illustrations 15 – 21)
For use with the Quinny carrycot (up to 9 kg) and the Maxi-Cosi car safety seat (up to 13 kg)
Placing / removing the adapters
- Remove both guards by pushing the red button under the adapter attachments outwards (15,1) while sliding
the guards upward at the same time (15,2).
- Slide the adapter marked A into the right-hand side and the adapter marked B into the left-hand side of the
adapter attachment.
- Continue sliding until you hear a "click" (16).
GB
9