Maxi-Cosi Quinny FREESTYLE XL COMFORT Modo De Empleo/Garantia página 12

GB
Cover
- Remove the pushchair seat from the Freestyle 3 XL Comfort (See Placing / removing the pushchair seat).
- Remove the safety bar (see Safety Bar section)
- To remove the cover, undo the poppers on the side (38,1).
- Loosen the straps under the seat and on the back (38,2).
- Open the cover (38,3).
- Remove the safety harness (see Safety Harness section).
- Remove the support plate from the back and seat (39).
- The cover, basket and pillow can be washed by hand in lukewarm water using a regular detergent (see
Washing instructions).
- To re-attach the cover, slide the board back in.
- Refasten all poppers and straps.
- IMPORTANT: Make sure the safety harness is secured properly.
- IMPORTANT: Never use the pushchair seat without the support plate.
Wheels
- Inflate the tyres to a maximum pressure of 26 PSI (1.8 Bar) using the pump supplied. Insufficiently inflated
tyres can lead to unnecessary wear and tear.
- If the inner tube has a puncture, you can repair it as you would a bicycle tyre or have it repaired at a bicycle
repair shop.
- Always deflate the tyres when taking the Freestyle 3 XL Comfort on an aircraft, as the tyres could burst out
due to the pressure difference.
- Clean the wheels regularly and remove all sand and dirt. Do not use oil, grease or cleaners.
Accessories
The following original accessories are available for the Freestyle 3 XL Comfort:
- Quinny carrycot
- Maxi-Cosi car seat
- Rain/wind cover
- Footmuff
- Nappy bag
- IMPORTANT: The use of non-original accessories can have an adverse affect on the working of the
Freestyle 3 XL Comfort.
- IMPORTANT: Minor colour variation may occur between the pushchair and accessories and generally does
not constitute a reason for replacing the product once it has been used.
Questions
- Contact your supplier or importer (see address on the back).
12